The new ADM-1000 Optical Power Meter provides a quick and easy way to make accurate and repeatable optical power measurements for lasers, LEDs and other light sources.
The standard hand-held instrument can be connected to any of the new range of Lasermet detector heads, which include photodiode and thermal types.
With digital and graphical display modes you can measure and view waveforms of pulsed lasers on the ADM-1000's large illuminated display.
A full illuminated numeric keypad enables quick and easy control and data entry.
Detector Heads
Standard photodiode heads all have integrating spheres to eliminate reflections, allow easy alignment and highly accurate measurement.
Market leading rise-times enable display of pulses down to 2 us and PRFs in excess of 400 kHz with photodiode heads. Thermal heads have advanced speed up circuits giving a rise time of 0.1 s; effectively instantaneous when being used for laser tuning.
Advanced integrated stabilisation circuitry massively reduces drift for thermal heads.
All heads are supplied with a calibration traceable to National Physical Laboratory standards.
This hand held Advanced Digital Meter includes the following functions:
Integrating Sphere Photo-Diode Heads
Type | Part No: | Wavelength Range | Detector |
Standard | IPDH-10S | 400nm-1050nm | Si |
UV Enhanced | IPDH-10S-UVE | 200nm-1100nm | Si |
IR Enhanced | IPDH-10S-IRE | 800nm-2000nm | InGAs |
Maximum optical input power: 1 W
Minimum optical input power for useable reading: 0.1µW
Response Time when used with ADM-1000 (E-folding): 700ns
Thermal Heads
Incorporating: Advanced Drift Compensation and Speed up circuit for super fast response time (0.1 s)
Type | Part No: | Max Av. Power | Detector |
Standard | ITDH-100P | 20 W | Peltier |
Wavelength range: 180 – 20,000 nm Response time E-folding): 0.1 s
Contact: Paul Tozer
E: office@lasermet.com